top of page

Filters

Dailey Engineering offers oil pump pre-filters for installation into standard AN fittings. The filter is captured between the flare of the hose end and fitting. To install in any existing system you simply undo the hose end, install the filter into the fitting and reassemble the hose end. Available in -10 and -12 with a 730-micron filter rating, these are used to protect the scavenge inlets of the oil pump.







 

This remote oil filter housing is designed for the K&N HP-1007 oil filter. A good intermediate size filter for moderate oil flows of the production GM LS engine.




bottom of page